Warthog Territory Forums
http://www.warthogterritory.net/forum/

New UAV
http://www.warthogterritory.net/forum/viewtopic.php?f=9&t=10928		 Page 1 of 1
Author:  engineguy [ 20 Jul 2006, 09:28 ]
Post subject: 
LMC's Skunk Works Reveals High-Altitude Unmanned System (Posted: Wednesday, July 19, 2006) FARNBOROUGH, England, July 19, 2006 – Lockheed Martin [NYSE: LMT] today unveiled the existence of a new high altitude, unmanned aerial demonstrator to reporters attending the Farnborough International Air Show. The announcement was part of a review of several Skunk Works projects highlighting technologies the company is exploring to enable technology for the future.

<img src="http://i41.photobucket.com/albums/e292/engineguy/Polecat1.jpg" border=0>

“This UAV is an effort to better understand the flight dynamics of a tailless unmanned air system in support of our ongoing research and development work for the U.S. Air Force’s future Long Range Strike Program as well as to field the next generation of structural composite concepts,” explained Frank Cappuccio, executive vice president and general manager of Advanced Development Programs and Strategic Planning.

Developed in only 18 months, using internal funding, unmanned system P-175 – nicknamed ‘Polecat’ – aligned with the well-known Skunk Works name – represents the key tenets for which the Skunk Works is known. “It was specifically designed to verify three things: new, cost effective rapid prototyping and manufacturing techniques of composite materials; projected aerodynamic performance required for sustained high altitude operations; and flight autonomy attributes,” said Cappuccio. “In addition, the company investment and the resulting successful flights are proof positive of our commitment to developing the next inflection point in unmanned systems.”

Cappuccio said the company is also exploring technologies to enable low boom, supersonic flight over land and global reach.

“It’s easy to identify a need,” said Cappuccio. “The hard part is evolving the technology to make filling that need possible. The Skunk Works is all about advancing the art of the possible. It may sound nebulous to some, but we thrive on ideas and innovation.”

Lockheed Martin ADP, which is part of Lockheed Martin Aeronautics Company, is the industry leader in innovative aerospace solutions providing expertise, novel approaches, cutting edge technology and a commitment to quality and timely performance to its customers.

Headquartered in Bethesda, Md., Lockheed Martin employs about 135,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. The corporation reported 2005 sales of $37.2 billion.


"Those who have long enjoyed such privileges as we enjoy forget, in time, that men have died to win them."
Franklin Deleano Roosevelt
Author:  Ice Pirate [ 20 Jul 2006, 11:06 ]
Post subject: 
Nice, thanks for sharing.

"Slow is Fast - Fast is Slow"
Author:  fenderstrat72 [ 21 Jul 2006, 05:59 ]
Post subject: 
Isn't it weird they announce it in Farnborough?

Fender

"Patriotism is your conviction that this country is superior to all other countries because you were born in it."
George Bernard Shaw
Author:  boomer [ 21 Jul 2006, 12:40 ]
Post subject: 
nope, it's all about da $$$$$ <img src=icon_smile_cool.gif border=0 align=middle>

Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$
Author:  fenderstrat72 [ 21 Jul 2006, 19:28 ]
Post subject: 
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
nope, it's all about da $$$$$ <img src=icon_smile_cool.gif border=0 align=middle>

Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>

I don't see the connection.

Fender

"Patriotism is your conviction that this country is superior to all other countries because you were born in it."
George Bernard Shaw
Author:  HogSnort [ 21 Jul 2006, 20:16 ]
Post subject: 
OK So call me stupid, but I have to ask...........

Isn't that just a B-2?
Modified to fly in UAV configuration or what?
I'm guessing I missed something somewhere along the lines here!
Author:  boomer [ 21 Jul 2006, 23:37 ]
Post subject: 
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
nope, it's all about da $$$$$ <img src=icon_smile_cool.gif border=0 align=middle>

Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>

I don't see the connection.

Fender

"Patriotism is your conviction that this country is superior to all other countries because you were born in it."
George Bernard Shaw

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
Farnborough and the Paris air shows ( and most others ) are about three things, prestige of being there and having the best booth, pretending to close big deals that were actually closed and signed weeks ago, and announcing your latest products to the epicenter of world aviation interest for the next two weeks or so. It's thier equivalent of a Superbowl commercial.

It's a stealthy flying wing, all stealthy flying wings look something like the B-2.

Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$
Author:  boomer [ 28 Jul 2006, 13:50 ]
Post subject: 
More:
<img src="http://img123.imageshack.us/img123/2103/polecat03covereb2.jpg" border=0>

Aeronautical Engineering

Lockheed Martin Skunk Works is in the UAV race with Polecat demonstrator
Aviation Week & Space Technology
07/24/2006, page 64

Amy Butler
Washington and London


Lockheed Martin Skunk Works enters the UAV race with Polecat
demonstrator

Printed headline: NOT TO BE LEFT BEHIND

Lockheed Martin's newly unveiled Polecat unmanned aerial system demonstrator is designed to explore
the aerodynamic characteristics of the tailless flying wing design at higher altitudes than attempted
to date, and possibly feed technologies into future aircraft for the U.S. Air Force.

The company's Advanced Development Programs sector, commonly called the Skunk Works, had been rumored to be
working on a secret unmanned aerial system (UAS) project for years. And, company officials are lifting the
veil in an attempt to quell critics who have said Lockheed Martin has been too focused on its manned
fighter business--with multibillion-dollar F-22 and F-35 programs--thereby neglecting future opportunities
with unmanned systems.

<img src="http://img230.imageshack.us/img230/7572/polecat03vk0.jpg" border=0>

With the Polecat prototype, the company is aiming at Boeing's and Northrop Grumman's turf--developing combat
UAS for the U.S. military and, possibly, the U.S. Navy's yet-to-bedefined Broad Area Maritime Surveillance program.

The Polecat UAS flies at low altitude last July at Nellis Test Range in Nevada. Credit: LOCKHEED MARTIN PHOTOS
<img src="http://img232.imageshack.us/img232/5046/polecat02qx3.jpg" border=0>

Skunk Works, noted for rapid prototyping and such technological feats as the high-flying U-2 and
speedy SR-71 reconnaissance aircraft, selected a tailless "Horton" wing design first used by Germany
in World War II. Without vertical structures and a tail, the 90-ft. wingspan vehicle is inherently
low-observable but it has not been "coated" with radar-reflecting materials because it is not expected
to fly operationally.

A new "twisting strut" inside the Polecat's wings is designed to flex in air and improve the laminar
flow over its swept wings, propelling the UAV to high altitudes. Aircraft such as the straight-winged
U-2 have traditionally behaved like gliders but lack a survivable design. "No one has ever developed in
this configuration a high lift-to-drag ratio, and we are going to do it higher than anyone has done it,"
says Skunk Works Executive Vice President Frank Cappuccio. The engine
inlets (see the cover photo) are designed to deflect radar energy away from the engines, masking some
signature, although Frank Mauro, Lockheed Martin's director of unmanned
systems, admits more work is needed to improve low observability.

Intended to soar to a 60,000-ft. altitude and higher, Lockheed Martin has two main mission areas
in mind for Polecat: the Air Force's yet-to-be defined Long Range
Strike (LRS) system and a next-generation
intelligence, surveillance and reconnaissance aircraft. So far, the flying wing has not flown that high. Mauro says
the B-2's 45,000-50,000-ft. operating area is the Horton's ceiling to date. "The air gets pretty
thin above those levels. Our main objective is to determine how
effective that wing concept
is at that altitude so we'll have better data if we should [develop] something that requires that design."
Cappuccio says that in the
coming months engineers are devising sensors for Polecat that are part of a contrail suppression
system. Contrails often give U-2s away despite altitude. So,
Skunk Works wants to detect conditions conducive to contrails and avoid these areas.
During its first two flights at the Nellis Test Range, Nev., last year, Polecat reached 15,000 ft.,
a limit set by the portion of the range where it was flying. Officials are now moving operations
to another area of the proving ground. Cappuccio, who unveiled
Polecat to the media during a briefing
at the Farnborough air show last week, says high-altitude flights are expected as soon as September.

Powered by two FJ44-3E Williams International engines, Polecat has a 9,000-lb. gross takeoff weight.
A bay nestled between the two engines can accommodate 1,000 lb. of sensors or weapons. Skunk Works is
negotiating with various sensor makers for potential demonstrations,
possibly conformal radar arrays.
Cappuccio adds that he wants to experiment with conformal antennae on the vehicle.

Engineers designed Polecat using 98% composites, aside from landing gear, avionics and engines, and it
consists of fewer than 200 parts--all to bring costs down. They used an innovative, low-temperature composite
curing process for the vehicle. Normally cured at 350F in an autoclave, the new technique relies
on a 150F curing process that eliminates the need for investing in autoclaves. The composites are then
post-cured. These are further iterations of processes used in the F-22, F-35 and Joint Air-to-Surface Standoff Missile programs.

Mauro says that UAS costs can be further cut by reducing manpower required for operation. Unmanned
aircraft have been vulnerable in the Pentagon's cutthroat budget environment because they remain as
pricey as their manned counterparts.

Flight tests in 2007 will explore a triple-redundant flight control system and software to "leapfrog"
existing UAS autonomy capabilities. Polecat is designed to take off and land autonomously. The government
is already pursuing a system whereby four UAS vehicles can be
monitored by one person. However, rules of engagement require many more looks at targets prior to
engagement by a UAS. Although Mauro acknowledges the military's
doctrine will have to catch up, the company is working on an autonomous target ID capability.

In response to criticism that Skunk Works has not been pursuing UAS technology, Mauro says, "We've taken
some hard shots in the past three or four years that [we were]
not in the UAS game, and there is a perception that our future is at risk. We are putting our money
where our mouth is." The demonstrator was ready for first flight in 2004, 18 months after the go-ahead
to begin work and at a cost of $27 million to the company. Another
$5 million has been spent to continue work since then, Mauro notes, adding that the funds are a "significant" portion
of Lockheed's aeronautics research investment.

While Boeing and Northrop Grumman have each reaped technical and financial benefits of the respective
X-45 and X-47 Joint Unmanned Combat Air System demo programs, Lockheed Martin lacked government support.
Mauro admits Skunk Works is playing catch-up in some respects, and that Polecat is not meant to be a product
in itself but rather to demonstrate technologies such as autonomous flight and the use of new
composite techniques and adhesives. "Transformation was the key-word
for the period and UASs were a mechanism for transformation. We were, effectively, on the outside
looking in relative to our participation on J-UCAS."

But freedom from government involvement has also worked in Polecat's favor. By contrast, J-UCAS,
with operational assessments planned to begin in Fiscal 2008, has suffered from fitful funding
and shifting requirements. USAF pulled out last year in favor of ongoing
studies on future strike concepts.

Most immediately, Polecat could also contribute to a design that would encroach on the duel between
Northrop Grumman's Global Hawk and a souped-up General Atomics Aeronautical Systems Predator,
called Mariner, for the U.S. Navy's Broad Area Maritime Surveillance program. It could raise questions
about the future of Lockheed Martin's partnership with General Atomics on Mariner. If the Navy
decides it wants a low-observable aircraft, Lockheed Martin would be relieved of its partnering obligation
to General Atomics, Cappuccio says.



Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$


Edited by - boomer on Jul 28 2006 13:06
Author:  HogSnort [ 01 Aug 2006, 17:14 ]
Post subject: 
Polecat?
You would think someone would come up with a better name!
Author:  boomer [ 01 Aug 2006, 23:29 ]
Post subject: 
I wish you folks could see the very cool new Skunk Works logo on that nose wheel door!!!

Brownells calls me Aaron Burr cause the
way I'm droppin Hamilton$
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/